GE IC200UAL005 Driver module

our website : https://www.kerienplc.com/

Kerien Automation Co., Ltd. is located in the beautiful coastal city-Xiamen, Fujian, China. It is one of the beautiful coastal tourist cities in Southeast China.
We are a supplier of industrial automation parts. We focus on PLC modules and DCS cards, and undertake PLC control cabinets and inverter control cabinets. The brands are as follows: 

Invensys Foxboro,Invensys Triconex,Rockwell Allen-Bradley Relianc,Schneider Modicon,ABB,Siemens,GE FANUC,Yaskawa,Bosch Rexroth,Westinghouse,Woodward,Ovatin...etc.

Problems to be noticed in digital signal connection
The input signals of the frequency converter include the digital input signals (switch type command signals) for operation of running/stop, forward/reverse, inching and other operating states. These signals are often from the digital output signals of PLC. PLC usually uses its internal relay contact (relay output type PLC) or components with switching characteristics (transistor output type PLC) to connect with the frequency converter to get the operation state command, as shown in Figure 1 and Figure 2. Attention shall be paid to the following when connecting digital signals:
(1) When the relay output type PLC is used to connect with the frequency converter, it should be noted that poor contact often leads to incorrect operation of the frequency converter, so the connection should be reliable in the actual wiring.
(2) When the transistor output type PLC is used to connect with the frequency converter, it should be noted that the voltage and current of the transistor itself are within their limits to ensure the reliability of the system.
(3) When designing the input signal circuit of the frequency converter, inductive loads such as relays should be avoided as much as possible. The surge current generated by the opening and closing of relays may cause the wrong operation of the frequency converter.
(4) When the switch signal outputted by PLC enters the frequency converter, sometimes there will be crosstalk between the external power supply and the control power supply of the frequency converter. Pay attention to separate grounding of PLC and the frequency converter to avoid using a common grounding wire.

GE FANUC PROGRAMMER CONTROLLER A20B-1003- 0870 *NEW OUT OF BOX* 
GE Fanuc # 30F AC Servo Motor, # A06B-0357-B756, WARRANTY
GE Fanuc SERIES IC600CP600K IC600CP600 IC600CP600L
GE FANUC A06B-6050-H103 VCU
GE FANUC IC655APU500 USPP IC655APU500
GE FANUC IC600YB947 USPP IC600YB947
GE FANUC IC693PCM301 USPP IC693PCM301
GE FANUC GENIUS HAND HELD MONITOR IC660HHM501 IC660HHM501K VERY GOOD CONDITION
GE FANUC 9450SA NSPP 9450SA
GE FANUC IC3600AVIA1 USPP IC3600AVIA1
GE FANUC A06B-0113-B075 AC BETA SERVO MOTOR ***XLNT***
GE FANUC IC3600QSPA103A122A USPP IC3600QSPA103A1B
GE FANUC IC3600QSPA103A103A USPP IC3600QSPA103A1C
GE FANUC IC3600QSPA103B122B USPP IC3600QSPA103B1B
GE FANUC IC3600QSPA103B103B USPP IC3600QSPA103B1C
GE FANUC IC3600QSPA104B105B USPP IC3600QSPA104B1A
GE Fanuc A06B-6059-H212#H594 A06B6059H212H594 AC Spindle Servo Unit Base
GE FANUC 44A397849-G01 USPP 44A397849G01
GE Fanuc AC Servo Motor A06B-0128-8677#7008RS

GE FANUC IC600YB917 USPP IC600YB917
GE/Fanuc IC600BF929K
GE FANUC IC693CPU364-BD 
GE FANUC BUS CONTROLLER IC693BEM331D SERIES 90-30 *NEW IN BOX*