• RASP-512AI1SL-C320S1
    RASP-512AI1SL-C320S1 150183 EATON ELECTRIC Speed controller, 400 V AC, 3-phase, 5.6 A, Control voltage exter
    Speed controller, 5.6 A, 2.2 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 modules, with braking resistance, with fan Speed controller, Description: integrated PTC thermistor monitoring and Thermoclick with safe isolation, Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation, optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed, Connection of supply voltage via adapter cable on round or flexible busbar junction, Diagnostics and reset on device and via AS-Interface, with AUTO - OFF/RESET - HAND key switches, 3 fixed speeds and 1 potentiometer speed, can be switched over from U/f to (vector) speed control, with selector switch REV - OFF - FWD, optional: Faster stop if external 24 V fails, without manual override switch, Fan: with fan, Braking resistance: with braking resistance, Rated operational voltage: Ue= 400 V AC, 3-phase, 480 V AC, 3-phase, Output voltage with Ve: U2= 400 V AC, 3-phase, Mains voltage (50/60Hz): ULN= 380 (-15%) - 480 (+10%) V, At 150% overload: Ie= 5.6 A, Control voltage external brake (50/60 Hz): 230/277 V AC, Mains voltage (50/60Hz): ULN= 380 (-15%) - 480 (+10%) V, assigned motor rating P Note: at 400 V, 50 Hz, 150 % Overload: P= 2.2 kW, assigned motor rating P Note: at 480 V, 60 Hz, 150 % Overload: P= 3 HP, assigned motor rating P Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, AS-Interface profile cable: S-7.4 for 31 modules, Standards: IEC/EN 61800-5-1, UL 61800-5-1, Guideline 2011/65/EU (RoHS), CE approval, UL approval, Degree of Protection: IP65, NEMA12
  • D26MR40A
    Cutler Hammer Type M Relay D26MR40A 10 Amp 4P 3387B
    UPC:782113180717  Product Length/Depth:4 in  Product Height:3.57 in  Product Width:2.38 in  Product Weigh:1.95 lb
  •  W210MLCFC
    Cutler Hammer W210MLCFC horizontal reversing starter
    Dimensions: ● Height: 9.38 IN ● Length: 5.75 IN ● Width: 6.31 IN Weight:1.85 LB Specifications: ● Amperage Rating: 15 A ● Coil: 380V 50 Hz, 440V 60 Hz ● Contact Configuration: 2NO-2NO ● Frame: B frame ● Frame Size: 45 mm ● Overload Range: 4-20A ● Terminals: Screw terminals ● Type: Full voltage reversing IEC starter
  • JD3250K
    CUTLER HAMMER WESTINGHOUSE CIRCUIT BREAKER JD3250K 250 AMP 3 POLE
    Product Length/Depth:4.06 in Product Height: 4.13 in Product Width: 4.13 in Product Weight: 9.21lb
  • KT3250T
    CUTLER HAMMER WESTINGHOUSE KT3250T MAGNETIC TRIP UNIT
    The trip unit includes either a fixed or an adjustable thermal element for inverse time delay on overload and an adjustable magnetic element for protection against short circuits. In open air at 40°C, a circuit breaker with the trip unit installed will carry continuously a current (Ith) equal to the ampere rating marked on the trip unit nameplate without exceeding a 50°C rise at the terminals. The National Electrical Code (USA) requirements state that enclosed overcurrent protective devices may be loaded to a maximum of 80 percent of the open air rating (Ith). 
  • SPB 100
    CUTLER HAMMER/WESTING​HOUSE SPB 100
    The Cutler-Hammer SPB Breaker is an encased power breaker designed to provide benefits of special interest to designers and users of power distribution systems. SPB breakers are available in either draw-out or fixed mounted configurations. Amperage: 3000 Family: SPB Trip Functions: LSIG Poles: 3 Type: SPB AIC: 100kA@480V Mount Type: Bolt-On
  • 13104AQD07
    CUTLER-HAMMER 13104AQD07
    ■ Industry standard 18 mm diameter threaded body has flat sides allowing it to be mounted like a tubular sensor or against any flat surface  ■ Right-angle viewing models mount in a depth of only 6/10th of an inch ■ Perfect Prox® technology provides exceptional background rejection and application problem-solving ■ Visible sensing beams let you see where the beam is aimed for quick setup and alignment  ■ Solid polyurethane housing completely encapsulates internal circuits for high resistance to shock and vibration ■ Adaptable modulation circuit provides immunity to crosstalk from other closely mounted sensors  ■ The industry’s only background rejection sensors with a 2-wire circuit design  ■ Models available with both AC and DC operation in a single unit — up to 264 volts AC!  ■ 4-wire DC sensors offer both NPN and PNP outputs  ■ Output status indicator visible from a wide 270° angle
  • CE55GN3AB
    Cutler-Hammer CE55GN3AB Reversing Contactors Size 1
    Reversing contactors are used primarily for reversing single- or three-phase motors in applications where running over current protection is either not required or is provided separately. They consist of two contactors mechanically and electrically interlocked to prevent line shorts and energization of both contactors simultaneously.
  •  FD3100
    Cutler-Hammer Circuit Breakers FD3100
    Product Length/Depth: 3.38 in Product Height: 6 in Product Width: 4.13 in Product Weight: 4.5 lb Three-pole, 100A, 600 Vac, 250 Vdc, 65 kAIC at 240 Vac, 35 kAIC at 480 Vac, Line and load, 50/60 Hz
  •  D100
    Cutler-Hammer D100 Programable Controller
    The D100 Micro Programmable Logic Controller series is a controller device series manufactured by Eaton Cutler-Hammer. These controllers are equipped with a central processing unit, power supply, memory module, and input/output circuitry for other terminals. These logic controllers are used to control counters, step sequences, flip-flop functions, 1-shot functions, master control functions, and timers. The D100 series controllers are available in a wide range of variants and they can be used to control a wide spectrum of applications. The logic controllers are compact in size and cost-effective. They have exceptional expansion abilities with 14 to 120 I/O. The D100 Micro Programmable Logic Controllers make use of true ladder logic programming. The controllers have the ability to display 8 runs of logic at a single time. The front of the controller is equipped with a large LCD screen. The D100 Micro Programmable Logic Controllers are used to monitor the operation of the whole machine system. Timers and counter registers can also be observed in real-time. The logic controllers are equipped with analog input modules, protocol modules, multidrop modules, RS 232 converters, and timer/counter access modules. The logic controllers are manufactured in different configurations to meet different requirements. They are available with 115 Volts AC and 24 Volts DC power supplies. A maximum of 12 inputs are supported by different controller variants. The D100 Micro Programmable Logic Controllers come with different system I/O capacities, disk sizes, and power supply ratings. All of the controllers use a lithium-ion battery rated at 3 Volts with 1200 mA. The controllers can only be operated in a temperature range between 0 and 60 degrees Celsius. They can be mounted either vertically or horizontally. There should be enough space around the controllers so that they can be properly ventilated.
  •  DT365UGK
    CUTLER-HAMMER DT365UGK DOUBLE THROW SAFETY SWITCH
    PRODUCT LENGTH/DEPTH 12.5 in PRODUCT HEIGHT 53.8 in PRODUCT WIDTH 23.08 in PRODUCT WEIGHT 144 lb TYPE Heavy Duty, Double-Throw AMPERAGE RATING 400A NUMBER OF POLES Three-pole VOLTAGE RATING 600 Vac, 250 Vdc ENCLOSURE NEMA 3R ENCLOSURE MATERIAL Painted galvanized steel FUSE CONFIGURATION Non-fusible NUMBER OF WIRES 3
  • E84CBE
    Cutler-Hammer E84CBE Limit Switch Series A1
    Specifications: ● Type: Overhoist heavy-duty mill ● Enclosure: NEMA 4 ● Action: Maintained ● Contact Configuration: 1NO-2NC ● Operating Voltage: 2200 Vac
  • JS360225A
    CUTLER-HAMMER EATON JS360225A 3 Pole 225 Amp 600 Volt Circuit Breaker
    Contact Eugene --Sales Manager E-mail:eugene@kerienplc.com Tel.& WeChat:86-13606038172 QQ:1906683268 Add: 1803 B-Building Taidi Haicang, Xiamen, China     Product Packing · Original package or international import package. Shipping and delivery · Items will be shipped within 3 business days from payment confirmation via UPS DHL FEDEX TNT or EMS etc · We can always deliver in prompt Payment Terms · Buyer Pays the shipping Charge and handling worldwide. · We accept TT.     ABOUT US  Dade Huicheng Technology (Xiamen) Co., Ltd. is located in the beautiful coastal city - Xiamen. It is a high-tech enterprise specializing in large-scale system spare parts (distributed control system, programmable controller, redundant fault-tolerant control system, robot control system, large servo control system) and other imported automation system spare parts, module sales and system integration. The automation brand products have a strong advantage, the company is equipped with professional technical personnel, aiming to provide customers with better service. Dade Huicheng Technology (Xiamen) Co., Ltd. which is in the spirit of professionalism, integrity, and cooperation,  dedicated to provide customers with better service, better price. Welcome to inquire.   Advantage Products CUTLER-HAMMER EATON G11WL800 PLATE RESISTOR  Cutler-Hammer EATON E66PN control unit 120/240v A1  Cutler-Hammer EATON E51CNS5 Proximity switch IN BOX Cutler-Hammer EATON E51CNP6 Proximity switch IN BOX Cutler-Hammer EATON E51CNP2 Proximity switch IN BOX Cutler-Hammer Eaton D80JE10E Pneumatic Timer Free Fast Shipping Cutler-Hammer Eaton D100 Programmable Controller D100CRA28_D1OOCRA28_Series A1 Cutler-Hammer Eaton CE15HN3 3-Pole 44 Amps Contactor Cutler-Hammer Eaton 3 Pole 65A Contactor XTCE065D00A - In Box Our service 1)100% full New - Original Factory Seal  2)Warranty: 12 months 3)Package: Original packing with cartons 4)Delivery time: Shipped in 3 days after payment
    A total of

    3

    pages

© Copyright: 2024 Kerien Automation Co., Ltd. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #