Rexroth MKD071B-035-GP0-KN Servo Motor National Warranty New Original

Lenze 8200 series vector frequency converter E82EV371K2C with a power of 0.37KW can be shipped by placing an order

Our store specializes in selling E82EV751K2C frequency converters with an original factory warranty of one year

The IQ 300 is a microprocessor based series of monitoring devices that provide single phase, 2 or 3 wire, and 3 phase, 3 or 4 wire electrical metering designed to replace numerous individual meters and recorders. The IQ 300 series devices are compact, and consist of a panel-mounted Display Module and a Base Module that can be attached to the Display Module or mounted remotely. The devices are password protected, menu driven and display a variety of user-selected electrical system values and provide control over certain measurement and data output functions. The IQ 300 series Base Modules communicate with the IQ 300 Display Module, providing access to view and reset system, phase and min/max values, and for providing viewing and editing of set points.

Specifications: ● Type: Overhoist heavy-duty mill ● Enclosure: NEMA 4 ● Action: Maintained ● Contact Configuration: 1NO-2NC ● Operating Voltage: 2200 Vac

The D100 Micro Programmable Logic Controller series is a controller device series manufactured by Eaton Cutler-Hammer. These controllers are equipped with a central processing unit, power supply, memory module, and input/output circuitry for other terminals. These logic controllers are used to control counters, step sequences, flip-flop functions, 1-shot functions, master control functions, and timers. The D100 series controllers are available in a wide range of variants and they can be used to control a wide spectrum of applications. The logic controllers are compact in size and cost-effective. They have exceptional expansion abilities with 14 to 120 I/O. The D100 Micro Programmable Logic Controllers make use of true ladder logic programming. The controllers have the ability to display 8 runs of logic at a single time. The front of the controller is equipped with a large LCD screen. The D100 Micro Programmable Logic Controllers are used to monitor the operation of the whole machine system. Timers and counter registers can also be observed in real-time. The logic controllers are equipped with analog input modules, protocol modules, multidrop modules, RS 232 converters, and timer/counter access modules. The logic controllers are manufactured in different configurations to meet different requirements. They are available with 115 Volts AC and 24 Volts DC power supplies. A maximum of 12 inputs are supported by different controller variants. The D100 Micro Programmable Logic Controllers come with different system I/O capacities, disk sizes, and power supply ratings. All of the controllers use a lithium-ion battery rated at 3 Volts with 1200 mA. The controllers can only be operated in a temperature range between 0 and 60 degrees Celsius. They can be mounted either vertically or horizontally. There should be enough space around the controllers so that they can be properly ventilated.

■ Industry standard 18 mm diameter threaded body has flat sides allowing it to be mounted like a tubular sensor or against any flat surface  ■ Right-angle viewing models mount in a depth of only 6/10th of an inch ■ Perfect Prox® technology provides exceptional background rejection and application problem-solving ■ Visible sensing beams let you see where the beam is aimed for quick setup and alignment  ■ Solid polyurethane housing completely encapsulates internal circuits for high resistance to shock and vibration ■ Adaptable modulation circuit provides immunity to crosstalk from other closely mounted sensors  ■ The industry’s only background rejection sensors with a 2-wire circuit design  ■ Models available with both AC and DC operation in a single unit — up to 264 volts AC!  ■ 4-wire DC sensors offer both NPN and PNP outputs  ■ Output status indicator visible from a wide 270° angle

The Allen-Bradley 1785-LT4 is one version of the Classic 1785 PLC-5 Programmable Controller modules. The maximum analog I/O of this module is 512 and the program scan time is 2 ms (discrete logic) and 8 ms (typical). To optimize this scan time, divide the I/O rack between multiple channels. Place the most critical I/O on a single channel, and turn off the I/O on other channels. Because all I/O channels are independent, the remote I/O scan on one channel will not affect remote I/O scan on other channels. The Allen-Bradley 1785-LT4 has 1 DH+ port, the remote I/O transmission rate is 57.6 kbps, and the maximum user memory is 6K words. The Allen-Bradley 1785-LT4 is regarded as Industrial Equipment Class 1, Class A in accordance with Publication IEC/CISPR 11. Without appropriate precautions, there may be difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. The operating temperature of this module is from -25-60 °C (-13-140 °F). The nonoperating temperature of this module is from -40-85 °C (-40-185 °F). The relative humidity of the 1785-LT4 is from 5-95% without condensation. The operating vibration of this module is 2 g at 10-500 Hz. The Allen-Bradley 1785-LT4 has an operating shock of 30 g (3 pulses, 11 ms). The nonoperating shock of this module is 50 g (3 pulses, 11 ms). The 1785-LT4 has an ESD immunity of 4 kV contact discharges and 8 kV air discharges.

The 8520-CPUX is a CPU module, manufactured by Allen Bradley Inc. This Central Processing Unit belongs to the 9/260 series product line of modules by Allen Bradley. The 8520-CPUX board can be found with two alternative part numbers, which 90781002 for the revision 02, or 90781001 for the 01 revision.  With a weight of approximately 3 pounds (1.36 kilograms) and dimensions close to 16 x 11 x 3 inches (406.4 x 279.4 x 76.2 millimeters), this Industrial Control System unit is one member of a series of parts that are necessary for the functionality of a 9/260 type enclosure. This processing unit, the 8520-CPUX, should be paired with a Motherboard and the Main Power Supply (abbreviated PS1). All three of these units will have to be inserted into the 9/260 series enclosure housing. The enclosure for which this CPU is necessary is a type of enclosure that can support digital or analog servo modules. This enclosure also supports remote I/O ports and the main power supply. When installing all of the necessary components to operate the 9/260 (or 9/290) type enclosure, the motherboard unit should be installed first and attached to the rear enclosure wall. This CPU can then be inserted next to the motherboard and attached to it. This CPU board should be slid along the provided tracks when removing or inserting it, to ensure that it is installed or removed correctly. This board contains a green LED light which has various indication abilities and an RS-232 port (port A), both of which can be seen when viewing the module from its front view. (The port on this part is used for RS-232 type communications only). From the side, the user will be able to see this CPU’s high-speed shadow RAM, its EPPS Jumper, its Super Capacitor, and its Flash memory on SIMMA.

The Allen-Bradley 1785-O5G PLC 5 Coprocessor Module serves as a backup module. This module comes with an RS-232-C Port and the backplane current of this module is 2.7 A at 5V DC. This module has a maximum of 3072 analog I/O. The I/O Scan Times Per Rack of this module are 10 ms at 57.6 kbits/s, 7 ms at 115.2 kbits/s, and 3 ms at 230.4 mbits/s. The Allen-Bradley 1785-O5G is intended for use in a Pollution Level Industry Environment 2, in excessive Category II applications (as defined in the publication of IEC 60664-1). Please remember that this power supply can operate at an altitude of up to 6562 feet without derating. If you connect or disconnect the cable and the terminal block and if you install or remove the 1785-O5G when the power is on, an electrical arc may occur. This can cause injury, damage, or even an explosion in hazardous locations. Make sure the power is removed and that the area is not hazardous before continuing. The operating temperature is 0 to 60 °C (32 to 140 °F), the storage temperature is -40 to 85 °C (-40 to 185 °F), and the relative humidity is 5 to 95% without condensation. The Allen-Bradley 1785-O5G has an operating shock of 30g (3 pulses, 11 ms) and a nonoperating shock 50g (3 pulses, 11 ms). This module must be installed in an enclosure with at least IP54-level protection for operation in Zone 2 environments.

The 1785-KA3 PLC-2 Family Communication Adapter Module by Allen Bradley is a communication adapter installed on any slot (except the furthest left) of the 1771 I/O chassis, which links the PLC-2 family processors to a Data Highway Plus (DH+) Network. The 1785-KA3 draws 1.2 A backplane current at 5 Volts DC. It has an interface port for connection to the PLC-2 Programmable Controller using the Data Highway Plus Processor cable and a Data Highway Plus drop-line, and for connection to the 1784-T50 Industrial Workstation using the Program Panel Interconnect Cable. The 1785-KA3 has 3 sets of switches: the Data Highway Plus baud rate switch assembly, the write options switch assembly and the node address group switch. These switches determine the mode of connection with other nodes on the network. This unit supports most PLC-2 family processors, and the module is keyed to the backplane by connecting the band between pins 4 and 6, 22 and 24 of the top connector. Its temperature range is between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit) at 5% to 95% non-condensing relative humidity; its storage temperature is between -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).

FOXBORO CM400YR-0C I/A SERIES

The Foxboro I/A Series Distributed Control System measurably improves plant-wide operations, performance and asset utilization in today's modern manufacturing enterprise. A key component of the InFusion Enterprise Control System, the I/A Series system offers the greatest breadth of capabilities for providing optimal performance for operators, engineers and maintenance personnel. Not only will you maximize plant performance, you will maximize your business operation in real time, allowing you to focus on optimal profit control.

FOXBORO I/A SERIES FBM 10 P0400YL MODULE 120V AC INPUT/OUTPUT I/O REV F2 57575

The HDS series servo motors provide more effective combinations of torque and inertia. Equipped with various high performance and high-resolution feedback options, HDS meets various requirements of applications and drives. By providing control on speed, torque and position with high precision and quality for the operation of terminal equipment, HDS helps to improve the efficiency and stability of the equipment and ensure higher reliability of the complete system.