ABB 3BSE056767R1 CI871K01 Processor Intelligence Module New in stock

B&R X20CP1484 PLC module NEW AND ORIGINAL

GE General Electric High Safety Performance Product IC693CPU351EK Driver CPU Module National Warranty

GE General Electric DS200TCDAH1B Supply Trade Export Price Advantage National Shipping

B&R X20CP1583/X20-CP-1583 PLC Processor Module FREE SHIPPING WORLDWIDE

ABB HIEE300900R0001 processor HIEE300900R0001 Control Panel DHL/FedEx

The IQ 300 is a microprocessor based series of monitoring devices that provide single phase, 2 or 3 wire, and 3 phase, 3 or 4 wire electrical metering designed to replace numerous individual meters and recorders. The IQ 300 series devices are compact, and consist of a panel-mounted Display Module and a Base Module that can be attached to the Display Module or mounted remotely. The devices are password protected, menu driven and display a variety of user-selected electrical system values and provide control over certain measurement and data output functions. The IQ 300 series Base Modules communicate with the IQ 300 Display Module, providing access to view and reset system, phase and min/max values, and for providing viewing and editing of set points.

  Dimensions: 2.0" x 11.0" x 6.0"   (5.1 cm x 27.9 cm x 15.2 cm)   Weight: 3 lbs 2.1 oz (1.4kg )

The Allen-Bradley 1785-LT4 is one version of the Classic 1785 PLC-5 Programmable Controller modules. The maximum analog I/O of this module is 512 and the program scan time is 2 ms (discrete logic) and 8 ms (typical). To optimize this scan time, divide the I/O rack between multiple channels. Place the most critical I/O on a single channel, and turn off the I/O on other channels. Because all I/O channels are independent, the remote I/O scan on one channel will not affect remote I/O scan on other channels. The Allen-Bradley 1785-LT4 has 1 DH+ port, the remote I/O transmission rate is 57.6 kbps, and the maximum user memory is 6K words. The Allen-Bradley 1785-LT4 is regarded as Industrial Equipment Class 1, Class A in accordance with Publication IEC/CISPR 11. Without appropriate precautions, there may be difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. The operating temperature of this module is from -25-60 °C (-13-140 °F). The nonoperating temperature of this module is from -40-85 °C (-40-185 °F). The relative humidity of the 1785-LT4 is from 5-95% without condensation. The operating vibration of this module is 2 g at 10-500 Hz. The Allen-Bradley 1785-LT4 has an operating shock of 30 g (3 pulses, 11 ms). The nonoperating shock of this module is 50 g (3 pulses, 11 ms). The 1785-LT4 has an ESD immunity of 4 kV contact discharges and 8 kV air discharges.

The Allen-Bradley 1785-O5G PLC 5 Coprocessor Module serves as a backup module. This module comes with an RS-232-C Port and the backplane current of this module is 2.7 A at 5V DC. This module has a maximum of 3072 analog I/O. The I/O Scan Times Per Rack of this module are 10 ms at 57.6 kbits/s, 7 ms at 115.2 kbits/s, and 3 ms at 230.4 mbits/s. The Allen-Bradley 1785-O5G is intended for use in a Pollution Level Industry Environment 2, in excessive Category II applications (as defined in the publication of IEC 60664-1). Please remember that this power supply can operate at an altitude of up to 6562 feet without derating. If you connect or disconnect the cable and the terminal block and if you install or remove the 1785-O5G when the power is on, an electrical arc may occur. This can cause injury, damage, or even an explosion in hazardous locations. Make sure the power is removed and that the area is not hazardous before continuing. The operating temperature is 0 to 60 °C (32 to 140 °F), the storage temperature is -40 to 85 °C (-40 to 185 °F), and the relative humidity is 5 to 95% without condensation. The Allen-Bradley 1785-O5G has an operating shock of 30g (3 pulses, 11 ms) and a nonoperating shock 50g (3 pulses, 11 ms). This module must be installed in an enclosure with at least IP54-level protection for operation in Zone 2 environments.

The 1785-L30B is an Allen-Bradley controller that belongs to the PLC5 controller family. This controller features 32Kwords user memory, Two (2) DH+/Remote I/O combination ports, configurable for Adapter or Scanner, One (1) serial port which supports RS-232, 423 and RS-422A communication standards. The 1785-L30B supports a large number of I/O devices. It supports up to 1024 I/O devices which may be composed of any combination of Discrete and analog input and output devices. Additionally, it also supports complementary 1024 input and 1024 output devices. Aside from the supports for large number of I/O devices, this controller is capable of implementing Remote I/O architecture as it may be connected to a maximum of 28 Remote I/O racks. For implementing Remote I/O architecture, the integrated communication ports such as DH+ and Remote I/O (RIO) channels may be utilized. Additionally, an Ethernet interface module may be added to implement the same architecture over Ethernet network. The 1785-L30B is installed with a battery that is used by the controller when power is removed from the controller. This battery maintains the user and program data stored within the controller’s user memory. It is assigned with a BATT indicator LED to report the current charge of the battery. For 1785-L530B, the battery can last up to 84 days when powered off at 100% and 150 days if Powered Off at 50% at an operating temperature of 60 Degree Celsius. When the BATT LED energizes, the battery remains operational for 5 days from the first occurrence of the signal. When the battery charge is completely drained, the contents of the user memory is maintained unless power is applied to the controller. It will only be erased when power is removed and battery is drained. The 1785-L30B has two built-in ports such as channel 1A and channel 1B. These ports are capable of being configured as remote I/O scanners, remote I/O adapters and DH+ communication interfaces. Additionally, the 1785-L30B controller is provided with a 25-pin connector Serial port interface. This serial port supports RS232C standard and configurable for system protocols such as ASCII and DF1. full and half-duplex master protocols and half-duplex slave protocol. An 8-pin mini-DIN connector marked as channel 1A is also provided that supports DH+ connection as well. The 1785-L30B has several indicators on the front panel used for easy interaction with the user. These indicators are marked as BATT used to display the status of the battery. The indicator marked PROC indicates controller state. The FORCE indicator is used to indicate if I/O forces are enabled. The COMM indicator is linked with channel 0 for reporting communication activity while Channel 1A and 1B both have dedicated status indicator. The controller has a Three-position key-switch for setting the controller mode. Each position corresponds to one mode of the processors such as Run, PROG and REM. When in RUN mode, the controller executes the program and act...

The 1785-L30B is an Allen-Bradley controller that belongs to the PLC5 controller family. This controller features 32Kwords user memory, Two (2) DH+/Remote I/O combination ports, configurable for Adapter or Scanner, One (1) serial port which supports RS-232, 423 and RS-422A communication standards. The 1785-L30B supports a large number of I/O devices. It supports up to 1024 I/O devices which may be composed of any combination of Discrete and analog input and output devices. Additionally, it also supports complementary 1024 input and 1024 output devices. Aside from the supports for large number of I/O devices, this controller is capable of implementing Remote I/O architecture as it may be connected to a maximum of 28 Remote I/O racks. For implementing Remote I/O architecture, the integrated communication ports such as DH+ and Remote I/O (RIO) channels may be utilized. Additionally, an Ethernet interface module may be added to implement the same architecture over Ethernet network. The 1785-L30B is installed with a battery that is used by the controller when power is removed from the controller. This battery maintains the user and program data stored within the controller’s user memory. It is assigned with a BATT indicator LED to report the current charge of the battery. For 1785-L530B, the battery can last up to 84 days when powered off at 100% and 150 days if Powered Off at 50% at an operating temperature of 60 Degree Celsius. When the BATT LED energizes, the battery remains operational for 5 days from the first occurrence of the signal. When the battery charge is completely drained, the contents of the user memory is maintained unless power is applied to the controller. It will only be erased when power is removed and battery is drained.

The Allen-Bradley PLC-5-40E is an Ethernet PLC-5 Processor. It has embedded TCP/IP communication, offering high-performance peer-to-peer communication. Its built-in web capabilities provide web diagnostics and module information, web user provided pages, and Domain Name Service (DNS). For communication, it has 1 Ethernet port, 2 DH+ or Remote I/O (Adapter or Scanner) ports, and 1 serial port configurable for RS-232 / RS-423 / RS-422A. The PLC-5-40E uses Ladder-logic and structured-text programming with an advanced instruction set including sequencer, file-handling, diagnostic, immediate I/O, shift register, and program control instructions. It is used in applications with real-time sequential and regulatory control requirements. The PLC-5-40E processor has a maximum user memory of 48K words with a limit of 32K words per data table file. It has up to 2048 total I/O (any number of the I/O can be inputs or outputs) with 2048 complementary inputs and outputs. It has 16 (0 – 17) I/O racks for I/O addressing. It has an I/O scan time per rack of 10ms at 57.6 kb/s, 7ms at 115.2 kb/s, and 3ms at 230.4 kb/s. The PLC-5-40E requires a backplane current of 3.6A at 5V and it has a maximum power dissipation of 19W. It also contains a battery-backed static RAM with an EEPROM program backup option. It is installed in the left-most slot of the 1771 I/O chassis and requires one slot. The PLC-5-40E processor has global status flags and input interrupts. It also has programmable fault response diagnostics which prevents system failure by reacting to the faults. The PLC-5-40E allows for segregation of tasks controlled by multiple main programs. It examines specific information at specific time intervals with the time interrupt routine.

The CP 5613 A2 is a communications processor for connecting PCs to PROFIBUS. The essential characteristics are as follows: ● The CP 5613 A2 is equipped with a PROFIBUS interface allowing up to 12 Mbps. It is intended for operation in PGs and PCs with a PCI bus interface according to the PCI standard V2.2. ● With the CP 5613 A2, up to 32 devices (PC, PG, SIMATIC S7 or ET 200) can be linked to form a network segment. By linking several segments with repeaters, a maximum of 124 nodes can be connected. ● Optimized for fast DP master operation (DP Base) with up to 124 DP slaves with full data consistency ● As an alternative, can also be used as a DP slave ● Relieves the PC due to event mechanisms (automatic detection of data changes) ● Fast logic support regardless of the user program (automatic linking of input and output data can be set by the user program). ● Plug and play support during installation of the hardware ● Support of all data transmission speeds from 9.6 kbps to 12 Mbps ● Floating RS-485 connector ● Support of PCI 3.3 V/5 V, 33 MHz/66 MHz, 32 bit/64 bit and PCI-X 66 MHz, 32 bit/64 bit