SIEMENS 6ES7490-0AB00-0AA0 MODULE one year warranty

SIEMENS 6ES7490-1AA00-0AA0 MODULE New in stock

Yaskawa JANCD-PC20 module JANCDPC20 accelerated shipment

CUTLER-HAMMER FD3200WA06 Module 

Specifications: ● Type: Overhoist heavy-duty mill ● Enclosure: NEMA 4 ● Action: Maintained ● Contact Configuration: 1NO-2NC ● Operating Voltage: 2200 Vac

The D100 Micro Programmable Logic Controller series is a controller device series manufactured by Eaton Cutler-Hammer. These controllers are equipped with a central processing unit, power supply, memory module, and input/output circuitry for other terminals. These logic controllers are used to control counters, step sequences, flip-flop functions, 1-shot functions, master control functions, and timers. The D100 series controllers are available in a wide range of variants and they can be used to control a wide spectrum of applications. The logic controllers are compact in size and cost-effective. They have exceptional expansion abilities with 14 to 120 I/O. The D100 Micro Programmable Logic Controllers make use of true ladder logic programming. The controllers have the ability to display 8 runs of logic at a single time. The front of the controller is equipped with a large LCD screen. The D100 Micro Programmable Logic Controllers are used to monitor the operation of the whole machine system. Timers and counter registers can also be observed in real-time. The logic controllers are equipped with analog input modules, protocol modules, multidrop modules, RS 232 converters, and timer/counter access modules. The logic controllers are manufactured in different configurations to meet different requirements. They are available with 115 Volts AC and 24 Volts DC power supplies. A maximum of 12 inputs are supported by different controller variants. The D100 Micro Programmable Logic Controllers come with different system I/O capacities, disk sizes, and power supply ratings. All of the controllers use a lithium-ion battery rated at 3 Volts with 1200 mA. The controllers can only be operated in a temperature range between 0 and 60 degrees Celsius. They can be mounted either vertically or horizontally. There should be enough space around the controllers so that they can be properly ventilated.

  Dimensions: 2.0" x 11.0" x 6.0"   (5.1 cm x 27.9 cm x 15.2 cm)   Weight: 3 lbs 2.1 oz (1.4kg )

The Allen-Bradley 1785-ME64 is a PLC 5 Memory Device Module. The 1785-ME64 has a memory size of 64K words. The Maximum I/O Chassis Universal Remote of this module is 32 per I/O Link. The maximum number of analog I/O of this module is 3072. The Backplane Current of this module is 2.5 A at 5V DC. The Allen-Bradley 1785-ME64 can be used as a Backup module. This module comes with a Control Coprocessor Expansion Port. Remember to switch power off before removing or inserting this module. If you remove or install the module with the power switched on, an electrical arc may happen, and this electrical arc can cause injury and excessive wear to the contacts on the module and its mating connector. Worn contacts may create electrical resistance and this may reduce the product’s reliability.  The Allen-Bradley 1785-ME64 is an Electrically Erasable Programmable Read-Only Memory (EEPROM) module. This module is user-modifiable read-only memory (ROM) which can be erased and reprogrammed (written to) repeatedly through applications with a higher-than-normal power supply voltage. The operating temperature of the 1785-ME64 is 0-60 °C (32-140 °F) and the storage temperature is -40-85 °C (-40-185 °F). The relative humidity is 5-95% without condensation. The Allen-Bradley 1785-ME64 has an operating shock of 30 g (3 pulses, 11 ms) and the nonoperating shock is 50 g (3 pulses, 11 ms). 

Compatible with all PLC-5 Controllers Range of Memory Sizes Compact Size EEPROM Used to Back Up Program Files Write Protection Jumper

The Allen-Bradley 1785-ENET is an Allen-Bradley PLC5 Ethernet Interface module. This module installs to a 1785 Backplane to provide a PLC5 controller Ethernet connectivity. It has One (1) RJ45 Ethernet communication interface supporting 10/100 Mbps transmission speed.

The Allen-Bradley 1785-LT4 is one version of the Classic 1785 PLC-5 Programmable Controller modules. The maximum analog I/O of this module is 512 and the program scan time is 2 ms (discrete logic) and 8 ms (typical). To optimize this scan time, divide the I/O rack between multiple channels. Place the most critical I/O on a single channel, and turn off the I/O on other channels. Because all I/O channels are independent, the remote I/O scan on one channel will not affect remote I/O scan on other channels. The Allen-Bradley 1785-LT4 has 1 DH+ port, the remote I/O transmission rate is 57.6 kbps, and the maximum user memory is 6K words. The Allen-Bradley 1785-LT4 is regarded as Industrial Equipment Class 1, Class A in accordance with Publication IEC/CISPR 11. Without appropriate precautions, there may be difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. The operating temperature of this module is from -25-60 °C (-13-140 °F). The nonoperating temperature of this module is from -40-85 °C (-40-185 °F). The relative humidity of the 1785-LT4 is from 5-95% without condensation. The operating vibration of this module is 2 g at 10-500 Hz. The Allen-Bradley 1785-LT4 has an operating shock of 30 g (3 pulses, 11 ms). The nonoperating shock of this module is 50 g (3 pulses, 11 ms). The 1785-LT4 has an ESD immunity of 4 kV contact discharges and 8 kV air discharges.

The 8520-CPUX is a CPU module, manufactured by Allen Bradley Inc. This Central Processing Unit belongs to the 9/260 series product line of modules by Allen Bradley. The 8520-CPUX board can be found with two alternative part numbers, which 90781002 for the revision 02, or 90781001 for the 01 revision.  With a weight of approximately 3 pounds (1.36 kilograms) and dimensions close to 16 x 11 x 3 inches (406.4 x 279.4 x 76.2 millimeters), this Industrial Control System unit is one member of a series of parts that are necessary for the functionality of a 9/260 type enclosure. This processing unit, the 8520-CPUX, should be paired with a Motherboard and the Main Power Supply (abbreviated PS1). All three of these units will have to be inserted into the 9/260 series enclosure housing. The enclosure for which this CPU is necessary is a type of enclosure that can support digital or analog servo modules. This enclosure also supports remote I/O ports and the main power supply. When installing all of the necessary components to operate the 9/260 (or 9/290) type enclosure, the motherboard unit should be installed first and attached to the rear enclosure wall. This CPU can then be inserted next to the motherboard and attached to it. This CPU board should be slid along the provided tracks when removing or inserting it, to ensure that it is installed or removed correctly. This board contains a green LED light which has various indication abilities and an RS-232 port (port A), both of which can be seen when viewing the module from its front view. (The port on this part is used for RS-232 type communications only). From the side, the user will be able to see this CPU’s high-speed shadow RAM, its EPPS Jumper, its Super Capacitor, and its Flash memory on SIMMA.

The Allen-Bradley 1785-O5G PLC 5 Coprocessor Module serves as a backup module. This module comes with an RS-232-C Port and the backplane current of this module is 2.7 A at 5V DC. This module has a maximum of 3072 analog I/O. The I/O Scan Times Per Rack of this module are 10 ms at 57.6 kbits/s, 7 ms at 115.2 kbits/s, and 3 ms at 230.4 mbits/s. The Allen-Bradley 1785-O5G is intended for use in a Pollution Level Industry Environment 2, in excessive Category II applications (as defined in the publication of IEC 60664-1). Please remember that this power supply can operate at an altitude of up to 6562 feet without derating. If you connect or disconnect the cable and the terminal block and if you install or remove the 1785-O5G when the power is on, an electrical arc may occur. This can cause injury, damage, or even an explosion in hazardous locations. Make sure the power is removed and that the area is not hazardous before continuing. The operating temperature is 0 to 60 °C (32 to 140 °F), the storage temperature is -40 to 85 °C (-40 to 185 °F), and the relative humidity is 5 to 95% without condensation. The Allen-Bradley 1785-O5G has an operating shock of 30g (3 pulses, 11 ms) and a nonoperating shock 50g (3 pulses, 11 ms). This module must be installed in an enclosure with at least IP54-level protection for operation in Zone 2 environments.

The 1785-L30B is an Allen-Bradley controller that belongs to the PLC5 controller family. This controller features 32Kwords user memory, Two (2) DH+/Remote I/O combination ports, configurable for Adapter or Scanner, One (1) serial port which supports RS-232, 423 and RS-422A communication standards. The 1785-L30B supports a large number of I/O devices. It supports up to 1024 I/O devices which may be composed of any combination of Discrete and analog input and output devices. Additionally, it also supports complementary 1024 input and 1024 output devices. Aside from the supports for large number of I/O devices, this controller is capable of implementing Remote I/O architecture as it may be connected to a maximum of 28 Remote I/O racks. For implementing Remote I/O architecture, the integrated communication ports such as DH+ and Remote I/O (RIO) channels may be utilized. Additionally, an Ethernet interface module may be added to implement the same architecture over Ethernet network. The 1785-L30B is installed with a battery that is used by the controller when power is removed from the controller. This battery maintains the user and program data stored within the controller’s user memory. It is assigned with a BATT indicator LED to report the current charge of the battery. For 1785-L530B, the battery can last up to 84 days when powered off at 100% and 150 days if Powered Off at 50% at an operating temperature of 60 Degree Celsius. When the BATT LED energizes, the battery remains operational for 5 days from the first occurrence of the signal. When the battery charge is completely drained, the contents of the user memory is maintained unless power is applied to the controller. It will only be erased when power is removed and battery is drained. The 1785-L30B has two built-in ports such as channel 1A and channel 1B. These ports are capable of being configured as remote I/O scanners, remote I/O adapters and DH+ communication interfaces. Additionally, the 1785-L30B controller is provided with a 25-pin connector Serial port interface. This serial port supports RS232C standard and configurable for system protocols such as ASCII and DF1. full and half-duplex master protocols and half-duplex slave protocol. An 8-pin mini-DIN connector marked as channel 1A is also provided that supports DH+ connection as well. The 1785-L30B has several indicators on the front panel used for easy interaction with the user. These indicators are marked as BATT used to display the status of the battery. The indicator marked PROC indicates controller state. The FORCE indicator is used to indicate if I/O forces are enabled. The COMM indicator is linked with channel 0 for reporting communication activity while Channel 1A and 1B both have dedicated status indicator. The controller has a Three-position key-switch for setting the controller mode. Each position corresponds to one mode of the processors such as Run, PROG and REM. When in RUN mode, the controller executes the program and act...

The 1785-KA3 PLC-2 Family Communication Adapter Module by Allen Bradley is a communication adapter installed on any slot (except the furthest left) of the 1771 I/O chassis, which links the PLC-2 family processors to a Data Highway Plus (DH+) Network. The 1785-KA3 draws 1.2 A backplane current at 5 Volts DC. It has an interface port for connection to the PLC-2 Programmable Controller using the Data Highway Plus Processor cable and a Data Highway Plus drop-line, and for connection to the 1784-T50 Industrial Workstation using the Program Panel Interconnect Cable. The 1785-KA3 has 3 sets of switches: the Data Highway Plus baud rate switch assembly, the write options switch assembly and the node address group switch. These switches determine the mode of connection with other nodes on the network. This unit supports most PLC-2 family processors, and the module is keyed to the backplane by connecting the band between pins 4 and 6, 22 and 24 of the top connector. Its temperature range is between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit) at 5% to 95% non-condensing relative humidity; its storage temperature is between -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).